映射方法

Response类的get()方法或alias()方法返回一个DataItem，内嵌在查询结果中。您需使用DataItem的as<Type>()方法将结果转换成合适的驱动类型。

Response response = client.uql("find().nodes() as n return n{*} limit 5");
List<Node> nodeList = response.alias("n").asNodes();

从数据库返回的结果n包含5个节点，均为NODE类型。asNodes()方法将这些节点转换成Node列表。

DataItem的类型映射方法：

驱动类型

所有驱动类型的对象均支持使用getter方法获取字段值，以及使用setter方法设定字段值，即便这些对象并未在下文中明确列出。

Node

Node对象包含以下字段：

作用在Node对象上的方法：

Response response = client.uql("find().nodes() as n return n{*} limit 5");
List<Node> nodeList = response.alias("n").asNodes();

System.out.println("ID of the 1st node: " + nodeList.get(0).getID());
System.out.println("Store name of the 1st node: " + nodeList.get(0).get("storeName"));

ID of the 1st node: 47370-257954
Store name of the 1st node: Meritxell, 96

Edge

Edge对象包含以下字段：

作用在Edge对象上的方法：

Response response = client.uql("find().edges() as e return e{*} limit 5");
Edge edge = response.alias("e").asFirstEdge();
System.out.println("Values of the 1st edge: " + edge.getValues());

Values of the 1st edge: {distanceMeters=20, duration=21s, staticDuration=25s, travelMode=Walk, transportationCost=46}

Path

Path对象包含以下字段：

作用在Path对象上的方法：

Response response = client.uql("n().e()[:2].n() as paths return paths{*} limit 5");
List<Path> pathList = response.alias("paths").asPaths();

System.out.println("Length of the 1st path: " + pathList.get(0).length());
System.out.println("Edge list of the 1st path: " + pathList.get(0).getEdges());
System.out.println("Information of the 2nd node in the 1st path: " + pathList.get(0).getNodes().get(1).toJson());

Length of the 1st path: 2
Edge list of the 1st path: [Edge(uuid=591, fromUuid=20, toUuid=1, from=15219-158845, to=47370-257954, schema=transport, values={distanceMeters=10521283, duration=527864s, staticDuration=52606s, travelMode=Airplane, transportationCost=21043}), Edge(uuid=599, fromUuid=21, toUuid=20, from=15474-156010, to=15219-158845, schema=transport, values={distanceMeters=233389, duration=13469s, staticDuration=1167s, travelMode=Airplane, transportationCost=467})]
Information of the 2nd node in the 1st path: {"brand":"Starbucks","storeName":"Las Palmas","ownershipType":"Licensed","city":"Pilar","provinceState":"B","timezone":"GMT-03:00 America/Argentina/Bu","point":{"latitude":-33.39,"longitude":-60.22},"_uuid":20,"_id":"15219-158845","schema":"warehouse"}

Graph

Graph对象包含以下字段：

Response response = client.uql("n(as n1).re(as e).n(as n2).limit(3) with toGraph(collect(n1), collect(n2), collect(e)) as graph return graph");
Graph graph = response.alias("graph").asGraph();
List<Node> nodes = graph.getNodes();
List<Edge> edges = graph.getEdges();

System.out.println("Node IDs:");
for (Node node : nodes) {
    System.out.println(node.getID());
}
System.out.println("Edge UUIDs:");
for (Edge edge : edges) {
    System.out.println(edge.getUUID());
}

Node IDs:
ad304833
u604131
ad534784
ad6880
Edge UUIDs:
363347
774098
527786
3

GraphSet

GraphSet对象包含以下字段：

Response response = client.uql("show().graph()");
List<GraphSet> graphSetList = response.alias("_graph").asGraphSets();
for (GraphSet graphSet : graphSetList) {
    if (graphSet.getStatus().equals("UNMOUNTED")) {
        System.out.println(graphSet.getName());
    }
}

DFS_EG
cyber
netflow

Schema

Schema对象包含以下字段：

Response response = client.uql("show().node_schema()");
List<Schema> schemaList = response.alias("_nodeSchema").asSchemas();
for (Schema schema : schemaList) {
    System.out.println(schema.getName() + " has " + schema.getTotal() + " nodes");
}

default has 0 nodes
user has 1092511 nodes
ad has 846811 nodes

Property

Property对象包含以下字段：

Response response = client.uql("show().node_property(@user)");
List<Property> propertyList = response.alias("_nodeProperty").asProperties();
for (Property property : propertyList) {
    if (property.getLte()) {
        System.out.println("LTE-ed property name: " + property.getName());
    }
}

LTE-ed property name: cms_group_id

Algo

Algo对象包含以下字段：

Response res = client.uql("show().algo()");
List<Algo> algoList = res.alias("_algoList").asAlgos();
System.out.println(algoList.get(0).toString());

Algo(name=fastRP, desc={"name":"fastRP","description":"Fast and Accurate Network Embeddings via Very Sparse Random Projection","version":"1.0.1","parameters":{"dimension":"int,required","normalizationStrength":"float,optional, 0 as default","iterationWeights":"float[],optional,[0.0,1.0,1.0] as default","edge_schema_property":"optional,for weighted random projection","node_schema_property":"optional","propertyDimension":"int,optional, maximum value is dimension","limit":"optional,-1 for all results, >=0 partial results"},"write_to_db_parameters":{"property":"set write back property name for each schema and nodes"},"write_to_file_parameters":{"filename":"set file name"},"result_opt":"27"}, version=null, params=null)

Exta

Exta是由用户开发的自定义算法。

Exta对象包含以下字段：

Response response = client.uql("show().exta()");
List<Exta> extaList = response.alias("_extaList").asExtas();
System.out.println(extaList.get(0).getName());

page_rank

Index

Index对象包含以下字段：

Response response = client.uql("show().index()");
List<Index> indexList = response.alias("_nodeIndex").asIndexes();

for (Index index : indexList) {
    System.out.println(index.getSchema() + " " + index.getProperties() + " " + index.getSize());
}

account name 0
movie name 2526

Response response = client.uql("show().fulltext()");
List<Index> indexList = response.alias("_edgeFulltext").asIndexes();

for (Index index : indexList) {
    System.out.println(index.getName() + " " + index.getProperties() + " " + index.getSchema());
}

contentFull content review

Privilege

Privilege对象包含以下字段：

Response response = client.uql("show().privilege()");
Privilege privilege = response.alias("_privilege").asPrivilege();
System.out.println(privilege.getSystemPrivileges());

[TRUNCATE, COMPACT, CREATE_GRAPH, SHOW_GRAPH, DROP_GRAPH, ALTER_GRAPH, MOUNT_GRAPH, UNMOUNT_GRAPH, TOP, KILL, STAT, SHOW_POLICY, CREATE_POLICY, DROP_POLICY, ALTER_POLICY, SHOW_USER, CREATE_USER, DROP_USER, ALTER_USER, GRANT, REVOKE, SHOW_PRIVILEGE]

Policy

Policy对象包含以下字段：

Response response = client.uql("show().policy()");
List<Policy> policyList = response.alias("_policy").asPolicies();
for (Policy policy : policyList) {
    System.out.println(policy.getName());
}

manager
operator

User

User对象包含以下字段：

Response response = client.uql("show().user('Tester')");
List<User> user = response.alias("_user").asUsers();
System.out.println(user.get(0).toString());

User(username=Tester, create=Fri Jul 26 14:10:06 CST 2024, systemPrivileges=[MOUNT_GRAPH, SHOW_GRAPH], graphPrivileges={Ad_Click=[FIND_EDGE, FIND_NODE], DFS_EG=[UPDATE, INSERT]}, propertyPrivileges=PropertyPrivilege(node=PropertyPrivilegeElement(read=[], write=[], deny=[]), edge=PropertyPrivilegeElement(read=[], write=[], deny=[])), policies=[operator])

Stats

Stats对象包含以下字段：

Response response = client.uql("stats()");
Stats stats = response.get(0).asStats();
System.out.println("CPU usage: " + stats.getCpuUsage() + "%");
System.out.println("Memory usage: " + stats.getMemUsage());

CPU usage: 5.415697%
Memory usage: 9292.265625

Process

Process对象包含以下字段：

RequestConfig requestConfig = new RequestConfig();
requestConfig.setGraphName("amz");

Response response = client.uql("top()", requestConfig);
List<Process> processList = response.alias("_top").asProcesses();
for (Process process : processList) {
    System.out.println(process.getProcessId());
}

a_2_569_2
a_3_367_1

Task

Task对象包含以下字段：

Response response = client.uql("show().task()", requestConfig);
List<Task> tasks = response.alias("_task").asTasks();
System.out.println(tasks.get(0).getTaskInfo().getAlgoName());
System.out.println(tasks.get(0).getParam().toString());
System.out.println(tasks.get(0).getResult().toString());

degree
{order=desc, limit=10}
{total_degree=590.000000, avarage_degree=1.940789, result_files=top10}

Table

Table对象包含以下字段：

作用在Table对象上的方法：

Response response = client.uql("find().nodes() as n return table(n._id, n._uuid) as myTable limit 5");
Table table = response.alias("myTable").asTable();
System.out.println("2nd row in table: " + table.toKV().get(1));

2nd row in table: {n._id=u604510, n._uuid=2}

Attr

Attr对象包含以下字段：

Response response = client.uql("find().nodes({@ad}) as n return n.brand limit 5");
Attr attr = response.alias("n.brand").asAttr();
System.out.println(attr.getValues());

[14655, 14655, 14655, 14655, 434760]